To replace the auxiliary switch in the spring mechanism, you can follow the steps below:
1. Locate the auxiliary switch: Locate the auxiliary switch on the spring mechanism. Typically, the auxiliary switch is located as part of a mechanical component that is tightly connected to the rest of the spring mechanism.
2. Disconnect power: Before replacing the auxiliary switch, be sure to disconnect the power supply to avoid electric shock.
3. Remove screws and other fixings: Use appropriate tools such as a screwdriver and pliers to remove screws and other fixings around the auxiliary switch.
4. Release the auxiliary switch: Carefully release the auxiliary switch from the spring mechanism. This may require some patience and skill to ensure that no other parts are damaged.
5. Install the new auxiliary switch: Place the new auxiliary switch in place and secure it to the spring mechanism using the screws and other fixings. Ensure that the new auxiliary switch is functioning properly and that the connections to other components are correct.
6. Test: After the replacement has been completed, test the spring mechanism auxiliary switch for proper operation. You can try to perform opening and closing operations to ensure that the auxiliary switch works in concert with the rest of the spring mechanism.
Please note that the exact replacement procedure may vary for different spring mechanisms. Always refer to the relevant owner's manual or contact a professional for guidance before carrying out any mechanical repairs.
